1-gang universal dimming actuator with two inputs for installation in a size 60 switch box. Floating contacts can be connected to the two inputs. The inputs have already been assigned to the actuator at the factory, enabling operation without programming. \n \nConnection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m. \n

FEATURES

\nDimming actuator function: \n- Switching and dimming lamps \n- Switch on and dimming behaviour can be adjusted \n- Feedback of the switching state and the brightness value \n- "Soft ON", "Soft OFF" and time dimmer \n- Dimming or jumping to brightness values \n- Timedelayed switch off when a switch off brightness is not reached \n- Short circuit and load failure signal \n- Scene operation \n- Blocked operation via an object with parameterisable brightness value at the beginning and the end of blocking \n- Behaviour of the dimming actuator after bus voltage recovery \nInput function: \n- Free assignment of the switching, dimming, blind and valuator functions \n- Locking object \n- Behaviour when bus voltage recovers \n- Switching: two switch objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction) \n- Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values. Telegram repetition and send stop telegram \n- Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step). Time between short and long operation. Slat adjustment time \n- Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge. Value adjustment via long push-button action for valuator. Scene ext. unit with memory function \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

BUS type:	KNX
Mounting support:	Flush
[Ue] Rated operational voltage:	230V @ 50/60 Hz
Number of outputs:	1
Load type:	LV halogen lamps : 50...210 VA (wound transformer) \nIncandescent lamps : 50...210 W, 230 V AC \nHalogen lamps : 50...210 W, 230 V AC \nLV halogen lamps : 50...210 W (electronic transformer)
IP degree of protection:	IP20

\n