For independent switching of two loads via make contacts. With integrated bus coupler and screw terminals. For installation on DIN rails EN 50022. The 230 V switch output can be operated with a manual switch. \n \nThe bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates readiness for operation after the application has been loaded. \n

FEATURES

\n- Operation as break or make contact \n- Delay functions for each channel \n- Staircase lighting function with/without manual OFF function \n- Cut-out warning for staircase lighting function \n- Blocking and additional logic operation or priority control \n- Scenes \n- Status feedback function per channel \n- Central function \n- Comprehensive parameterisation for bus voltage failure and recovery \n- Parameterisable download behaviour \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

BUS type:	KNX
Number of contacts:	2
Total number of 18 mm modules:	2.5
Mounting support:	DIN rail
[Ue] Rated operational voltage:	100...240 V
Network frequency:	50/60 Hz
[In] Rated current:	16 A
Load type:	Parallel compensated fluorescent lamp : <= 1086 VA, 100 V AC \nParallel compensated fluorescent lamp : <= 2500 VA, 230 V AC \nParallel compensated fluorescent lamp : <= 2608 VA, 240 V AC \nIncandescent lamps : <= 1600 W, 100 V AC \nIncandescent lamps : <= 3600 W, 230 V AC \nIncandescent lamps : <= 3840 W, 240 V AC \nHalogen lamps : <= 1086 W, 100 V AC \nHalogen lamps : <= 2500 W, 230 V AC \nHalogen lamps : <= 2608 W, 240 V AC \nCapacitive : 16 A - 200 µF, 100...240 V AC
IP degree of protection:	IP20

\n