For connecting eight conventional push-buttons or floating contacts to the KNX. Internally generates a signal voltage SELV, electrically isolated from the bus. \n \nWith integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 50022. The bus is connected using a bus connecting terminal; a data rail is not necessary. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded. \n

FEATURES

\n- Switching \n- Dimming or blind control via 1 or 2 inputs \n- Positioning values for blind control (8-bit) \n- Pulse edges with 1-, 2-, 4-, or 8-bit telegrams \n- Differentiation between short/long operation \n- Initialisation telegram \n- Cyclical sending \n- Pulse edges with 2-byte telegrams \n- 8-bit linear regulator \n- Disable function \n- Break/make contact \n- Debounce time \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Range:	KNX
Product or component type:	Binary Input
BUS type:	KNX
Total number of 18 mm modules:	4
Wiring device mounting:	DIN rail
[Ue] Rated operational voltage:	10 V AC 50 Hz
Output type:	Provide signal voltage
Number of inputs:	8
Input type:	Binary
Local signalling:	LED

\n