FUNCTION DESCRIPTION:

\n- 2-way universal dimmer actuator FIX1 \n- For dimming dimmable LED, incandescent lamps, LV, HV halogen lamps and energy saving lamps \n- Also suitable for dimming of dimmable energy-saving lamps \n- Also suitable for controlling fans \n- LED switching status display for each channel \n- Manual operation on device (even without bus connection) \n- Dimming output: 400 W/VA per channel or 800 W/VA in parallel operation \n- The dimming output can be upgraded by using additional dimmboosters "DMB 1 T KNX" - dimming output 300 W/VA for each dimmbooster. Output to a maximum of 2000 W/VA by using max. 4 boosters possible \n- Automatic load detection (can be deactivated) \n- For R, L and C loads \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Operating voltage KNX	Bus voltage, ≤4 mA
Operating voltage	230 V AC 50 Hz
Width	4 modules
Installation type	DIN rail
Type of connection	Terminal screws | Bus connection: KNX bus terminal
Max. cable cross section	Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm²
Number of channels	2
Lamp types	Incandescent, low-voltage and high-voltage halogen and dimmable energy saving lamps and LED
Incandescent/halogen lamp load	400 W
LED lamp	Trailing edge (RC-mode): 400 W
Energy saving lamps	Trailing edge (RC-mode): 400 W
Switching capacity min.	5 W
Max. cable length	100 m
Ambient temperature	-5°C ... 45°C
Type of protection	IP 20
Protection class	II according to EN 60 669

\n