FUNCTION DESCRIPTION:

\n- 6-way binary input MIX2 \n- Extension module MIX2 \n- For upgrading to maximum of 18 channels \n- 6 floating universal and wide-range voltage inputs (10-240 V AC/DC or internally generated auxiliary voltage of approx. 12 V DC) \n- 2 additional channels operable by buttons on the device, but without input \n- Up to two extension modules MIX or MIX2 can be connected to one base module \n- Device and KNX bus module can be swapped independently of each other \n- Removable KNX bus module enables devices to be changed without reprogramming \n- Manual set-up and use of actuator is possible without KNX bus module \n- LED switching status display for each channel \n- Manual operation on device (even without bus connection) \n- Manual operation per channel for simulating the input states \n- All inputs can be operated with different voltages and at different potentials \n- Connectable cable length up to 100 m \n- Free allocation of functions: switch/push button, dimming, blinds/roller blinds, counter, repeat telegram, sequences \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Width	4 modules
Installation type	DIN rail
Type of connection	KNX bus terminal
Max. cable cross section	Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm²
Voltage inputs	10 V DC -– 240 V AC 2 mA
Max. cable length	100 m
Output	12 V DC/18 mA, no SELV
Display	6 LEDs
Suitable for SELV	Yes, if all inputs are connected with SELV
Ambient temperature	-5°C ... 45°C
Type of protection	IP 20
Protection class	II according to EN 60 730-1

\n