FUNCTION DESCRIPTION:

\n- 4-way blind actuator 24V MIX2 \n- Base module MIX2 \n- Can be upgraded to maximum of 12 channels \n- For controlling 24V drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps \n- Up to 2 extension modules can be connected to a base module \n- Up to two extension modules MIX or MIX2 can be connected to one base module \n- Device and KNX bus module can be swapped independently of each other \n- Removable KNX bus module enables devices to be changed without reprogramming \n- Manual set-up and use of actuators is possible without KNX bus module \n- Free combination of switches, dimming, blinds and heating control as well as binary inputs \n- For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps \n- Manual operation on device (even without bus connection) \n- LED Up and Down switching status display for each channel \n- Potential-free contacts for Up and Down per channel \n- Setting option for phase sequence and running time of deives \n- Copy function for fast configuration \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Operating voltage KNX	Bus voltage, ≤4 mA
Operating voltage	110 -– 240 V AC 50 –- 60 Hz
Stand-by consumption	~0.3 W
Number of channels	4
Width	4 modules
Installation type	DIN rail
Type of connection	Terminal screws | Bus connection: KNX bus terminal
Max. cable cross section	Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm²
Output	Changeover contact, 6 A
Switching capacity	6 A at 24 V DC
Switching output	Potential-free, for SELV, if the whole device switches SELV
Ambient temperature	-5°C ... 45°C
Type of protection	IP 20
Protection class	II according to EN 60 669

\n