The weather station records and processes analogue sensor signals such as wind speed, brightness, twilight, precipitation and a DCF-77 signal. Up to four analogue sensors and the DCF-77 weather combi-sensor can be connected in any combination. In connection with the 4-gang analogue input module, 8 analogue inputs are available, to which the connection is made using the sub-bus. \nFor installation on DIN rails EN 50022. \n \nThe bus is connected using a bus connecting terminal; a data rail is not necessary. If DCF-77 weather combi-sensors are used, it is possible to access a pre-configured setting in the software. The measured values are converted by the weather station into 1 byte / 2 byte telegrams (EIS 6/5 value). This enables bus devices (visualisation software, measured value displays) to access the control processes, generate signals or control weather-dependent processes. Programming is performed using the ETS tool for the weather station. \n

FEATURES

\n- Two limit values per sensor (not for rain) \n- Connection of multiple wind sensors \n- 14 signals can be evaluated \n- Evaluation of DCF-77 time signal (date and time) \n- Astro function \n- Logic operation controller for application of limit-value-dependent actions (even external) \n- Shading of individual façade segments \n- Signal monitoring of the combi-sensors with object for the following protective measures \n- Checking the wind signal for conclusiveness with object for the following protective measures \n- Selective façade shading (for 4 façades) with adjustment of the basic brightness, façade alignment, angle of opening relative to the sun. \n- External objects for intervention in basic brightness, angle of opening and limit values \n- Alarm byte \n- Continuity monitoring with report on the bus \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Auxiliary voltage:	AC 24 V (+/-10 %)
Analogue inputs:	4
Current interface:	0 ... 20 mA, 4 ... 20 mA
Voltage interface:	0 ... 1 V, 0 ... 10 V
Outputs:	DC 24 V, 100 mA
Device width:	4 modules = approx. 72 mm

\n