For System M. \nComfortable room controller for controlling up to 32 room functions and the room temperature. \nAll functions are displayed on a touch screen and are called up using simple finger movements. \nThe user chooses from 3 interface designs that can be freely assigned to the room functions. The room temperature control can be shown in 2 different designs. \nWith room temperature control unit, display and connection for the remote sensor. \nThe room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. \n \nETS device functions: \n- Switch-on behaviour of the user interface \n- Proximity function: The display and the start screen only become visible when approached \n- Gesture function: The device recognises a gesture (horizontal or vertical swipe movement) and triggers a function. In this way, the light can be switched on when you enter the room, for example. \n- Cleaning mode: For a specific period of time, neither touches nor gestures are detected \n- Adjusting the background lighting \n- Setting the screen saver \nWith integrated bus coupler. The bus is connected using a bus connecting terminal. \n

KNX SOFTWARE FUNCTIONS

\nControl unit/push-button: \n- switching \n- toggling \n- dimming (single/dual-surface) \n- blind (single/dual-surface) \n- pulse edges \n- trigger 1-, 2-, 4- or 8-bit telegrams \n- pulse edges with 2-byte telegrams \n- 8-bit linear regulator \n- scene retrieval \n- scene saving \n- signal function \n- fan control \n- operating modes \n- setpoint adjustment \n \nFunctions of the room temperature control unit: \nController type: 2-step controller, continuous-action PI control, switching PI control (PWM) \nOutput: continuous in the range 0 to 100% or switching ON/OFF \nController mode: \n- Heating with one controller output \n- Cooling with one controller output \n- Heating and cooling with separate controller outputs \n- 2-step heating with 2 control outputs \n- 2-step cooling with 2 control outputs \n- 2-step heating and cooling with 4 control outputs \nOperating modes: Comfort, comfort extension, standby (ECO), night reduction, frost/heat protection \nMove all setpoints. \nSave all setpoint temperatures and operating modes when reset. \nExternal temperature monitoring. \nAdditional output of the control value as 1 byte value on the PWM. \nSignal function for the actual temperature, valve protection function. \n \nScene function. \nOperation: Touch display \n \nNOTES: Frames are sold separately and they can be purchased here: link \nProgrammable with ETS4 and higher. \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Range	KNX
Product or component type	Room controller
Device presentation	Insert with central cover plate
Colour tint	Black
Fixing mode	By 2 screws
Device mounting	Flush
Display type	Colour TFT display
Control type	x touch screen
Mechanical robustness	With optional anti-theft or dismantling protection
Material	Plastic
Dimensions	71 x 71 x 30 mm
IP degree of protection	IP20

\n