1-gang blind actuator with three inputs for installation in a size 60 switch box. Floating contacts can be connected to the three inputs. The inputs have already been assigned to the actuator at the factory, enabling operation without programming. \n \nConnection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m. \n

FEATURES

\nBlind actuator function: \n- Operation mode: Blinds, roller shutters, awnings or ventilation flaps \n- Raising or lowering times with extension for the upper limit position \n- Status feedback of the position or of the slat position \n- Active/passive status feedback, cycl. status feedback function \n- Up to 5 safety functions (3 wind alarms, 1 rain alarm, 1 frost alarm) \n- Cycl. monitoring \n- Sun protection function with fixed and variable positions \n- Shading controls with heating/cooling automatic mode and presence function \n- Behaviour when bus voltage fails/recovers \n- Status feedback delay after bus voltage recovery \n- Priority function \n- 8 Scene function \n- Memory function for scenes \nInput function: \n- Free assignment of the switching, dimming, blind and valuator functions \n- Locking object \n- Behaviour when bus voltage recovers \n- Switching: two switch objects per input \n- Command on rising/falling edge (ON, OFF, TOGGLE, no reaction) \n- Dimming: Single surface and dual-surface operation \n- Time between dimming and switching and dim step values \n- Telegram repetition and send stop telegra \n- Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step) \n- Time between short and long operation \n- Slat adjustment time \n- Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge \n- Value adjustment via long push-button action for valuator \n- Scene ext. unit with memory function \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

BUS type:	KNX
Rated input:	Signal voltage (SELV) : 3 x binary
Mounting support:	Flush
[Ue] Rated operational voltage:	230 V AC 50/60 Hz
[In] Rated current:	3 A
Number of outputs:	1
Load type:	Motor : 600 VA, 230 V AC
IP degree of protection:	IP20

\n