KNX CONTROL UNIT 0-10 V REG-K/1-GANG WITH MANUAL MODE - MTN647091

KNX CONTROL UNIT 0-10 V REG-K/1-GANG WITH MANUAL MODE - MTN647091 0 €0.00

Популярный

На складе Код товара: MTN647091

SCHNEIDER Производитель

€0.00

Быстрый заказ

Нашли дешевле?

Информация о доставке

Описание

For connecting devices with 0-10 V interface to KNX. With integrated bus coupler and screw terminals (230 V) or plugin screw terminals (0-10 V). The 230 V switch output can be operated with a manual switch. For installation onto DIN rails EN 50022. \n \nThe bus is connected using a bus connecting terminal; a data rail is not necessary. \n

FEATURES

\n- Different dimming curves and dimming speeds \n- The same dimming time \n- Memory function \n- ON/OFF delay \n- Staircase time function with/without manual OFF function \n- Scenes (up to eight stored brightness values can be retrieved) \n- Central function \n- Logic operation or priority control \n- Blocking function \n- Status feedback \n- Behaviour on bus voltage recovery \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

BUS type:	KNX
Total number of 18 mm modules:	2.5
Mounting support:	DIN rail
[Ue] Rated operational voltage:	100...240 V AC V @ 50/60 Hz
Input current:	0.12...100 mA
Analogue output type:	Voltage
Analogue output range:	1...10 V
Number of outputs:	1
[In] rated current:	16 A
Load type:	Parallel compensated fluorescent lamp : <= 1086 VA, 100 V AC \nParallel compensated fluorescent lamp : <= 2500 VA, 230 V AC \nParallel compensated fluorescent lamp : <= 2608 VA, 240 V AC \nIncandescent lamps : <= 1600 W, 100 V AC \nIncandescent lamps : <= 3600 W, 230 V AC \nIncandescent lamps : <= 3840 W, 240 V AC \nHalogen lamps : <= 1086 W, 100 V AC \nHalogen lamps : <= 2500 W, 230 V AC \nHalogen lamps : <= 2608 W, 240 V AC \nCapacitive : , 16 A, 200 µF, 100...240 V AC
IP degree of protection:	IP20