For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts. The function of the blind or switching channels is freely configurable. All blind/switch outputs can be operated manually using push-buttons. With integrated bus coupling unit. For installation on DIN rails EN 50022. \n \nThe bus is connected using a bus connecting terminal; a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. \n

FEATURES

\nBlind functions: \n- Blind type \n- Running time \n- Idle time \n- Step interval \n- Weather alarm \n- 8-bit positioning for height and slats \n- Scenes \n- Status and feedback function \nSwitch actuator functions: \n- Operation as break contact/make contact \n- Programmable behaviour for download \n- Delay functions for each channel \n- Staircase lighting function with/without manual OFF function \n- Cut-out warning for staircase lighting function \n- Scenes \n- Central function \n- Disable function \n- Logic operation or priority control \n- Status feedback function for each channel \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

BUS type:	KNX
total number of 18 mm modules:	8
Mounting support:	DIN rail
[Ue] Rated operational voltage:	100...240 V AC 50...60 Hz
[In] rated current:	10 A
Number of outputs:	8
Load type:	Parallel compensated fluorescent lamp : <= 434 VA, 100 V AC \nParallel compensated fluorescent lamp : <= 1000 VA, 230 V AC \nParallel compensated fluorescent lamp : <= 1043 VA, 240 V AC \nMotor : 434 W, 100 V AC \nMotor : 1000 W, 230 V AC \nMotor : 1043 W, 240 V AC \nIncandescent lamps : <= 869 W, 100 V AC \nIncandescent lamps : <= 2000 W, 230 V AC \nIncandescent lamps : <= 2086 W, 240 V AC \nHalogen lamps : <= 739 W, 100 V AC \nHalogen lamps : <= 1700 W, 230 V AC \nHalogen lamps : <= 1773 W, 240 V AC \nCapacitive : , 10 A, 105 µF, 100...240 V AC
IP degree of protection:	IP20

\n