2-gang switch actuator with two inputs for installation in a size 60 switch box. Floating contacts can be connected to the two inputs. \nThe inputs have already been assigned to the corresponding actuators at the factory, enabling operation without programming. \n \nConnection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m. \n

FEATURES

\nSwitch actuator functions: \n- Operation as break contact or make contact \n- Selection of default position on bus voltage failure/recovery \n- Switch on and/or off delay \n- Time switch function \n- Switching \n- Status feedback \n- Logic operation \n- Disable function or priority control \n- Status feedback object can be inverted \n \nBinary input function: \n- Free assignment of the switching, dimming, blind and valuator functions \n- Locking object \n- Behaviour when bus voltage recovers \n- Switching: \n+ Two switch objects per input \n+ Dimming: Single surface and dual-surface operation \n+ Time between dimming and switching and dim step values \n+ Telegram repetition and send stop telegram \n- Blinds: \n+ Command on rising edge (none, UP, DOWN, TOGGLE) \n+ Operation concept (Step - Move - Step or Move - Step) \n+ Time between short and long operation \n+ Slat adjustment time \n- Valuator and lightscene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge \n- Value adjustment via long push-button action for valuator \n- Lightscene ext. unit with memory function. \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Device mounting:	Flush
[Ue] Rated operational voltage:	230 V
Network frequency:	50/60 Hz
[In] Rated current:	6 A
Load type:	Low voltage halogen lamp with wire-wound transformer : <= 500 VA \nIncandescent lamps : <= 1200 W, 230 V AC \nHalogen lamps : <= 1200 W, 230 V AC \nLow voltage halogen lamp with electronic transformer : <= 500 W \nCapacitive : 6 A - 14 µF, 230 V AC
IP degree of protection:	IP20

\n