KNX SHUTTER ACTUATOR 1F FLUSH MOUNTED 6A 230VAC WITH 4 BINARY INPUTS
€0.00
KNX SHUTTER ACTUATOR 1F FLUSH MOUNTED 6A 230VAC WITH 4 BINARY INPUTS
Популярный
Информация о доставке
Нашли дешевле?
Введите адрес доставки
Описание
The MDT Shutter Actuator with monostable relays is individually programmable by the ETS. Switching, alarm, central and blocking functions are available as well as extensive calibration and positioning functions. The exact position can be driven in tip mode and separate travel times for up / down can be set.
\n
\nThe MDT Shutter Actuator has a practical ventilation function and automatic sun protection/slat tracking with sun position calculation. Automatic and scene functions can be programmed additionally. As well automatic and scene functions can be programmed.
\n
\nIf the mains voltage fails, all outputs are switched off. After bus voltage failure or recovery the switching positions of the relays can be programmed individually for each channel.
\n
\nIn addition to the function as a shutter actuator, the actuator has 4 potential free binary inputs that act as a universal interface. At these inputs, buttons, switches, door and window contacts can be queried. Each input can be parametrized individually by the ETS. The roller and blind functions can be parameterized for 1 and 2 button operation.
\n
\nThe interpretation of the connected window contacts takes place directly in the actuator. The transmission behavior of the up/down objects can be set, either the internal switching contacts or actuators on the KNX bus can be controlled.
\n
\nThe MDT Shutter Actuator is a flush mounted device to be inserted in a wiring box or behind a push button or switch. It has to be installed in dry rooms.
\n
\n* There is no galvanic separation between contact voltage and KNX bus voltage.
\n** If any 230V cables are in the vincinity, make sure to maintain the distances to them specified as in the applicable standars and regulations.
\n
\n
FEATURES
\nShutter/blind functions: \n- Practical ventilation function (window open/tilt) \n- Automatic sun protection/slat tracking with sun position calculation \n- Travel-, pause-at-change-of-direction and step time adjustable \n- Separate travel time for up and down adjustable \n- Tip operation for accurate positioning \n- Extended 1Bit automatic positions and logical functions \n- 1Byte absolute positioning for shutter and blinds \n- Alarm, central- and block functions \n- Priority/forced operation with automatic release time \n- Adjustable behavior in case of bus voltage return \n \nFunctions Binary Inputs: \n- To connect push-buttons or window/auxiliary contacts \n- Integrated interpretation of the windows contacts \n- Adjustable transmission behavior of the up/down objects \n(To the internal contacs or actuators on the KNX bus) \n- Operation of blinds and shutters, 1 and 2 button operation \n- Binary Inputs usable as Universal Interface \n- Production in Germany, certified according to ISO 9001 \n- Dimensions (W x H x D): 41mm x 41mm x 22mm \n- 3 years warranty \nTECHNICAL DETAILS
\nNumber of input channels | \n4 | \n
Contact voltage input channel | \n3,3VDC* internal | \n
Number of output channels | \n1 | \n
Output switching ratings: | \n|
Ohmic load | \n6A | \n
Voltage | \n230VAC | \n
Maximum load (single-phase motor) | \n300W | \n
Output life expectancy (mechanical) | \n1.000.000 | \n
Maximum fuse per channel | \n10A | \n
Specification KNX interface | \nTP-256 with long frame support for ETS5 | \n
Available application software | \nETS 4/5 | \n
Permitted wire gauge: | \n|
Cable to connect outputs | \n1,5mm² | \n
KNX busconnection terminal | \n0,8mm Ø, solid core | \n
Power Supply | \nKNX bus** | \n
Power consumption KNX bus typ. | \n<0,3W | \n
Operation temperature range | \n0 to + 45°C | \n
Enclosure | \nIP 20 | \n
Dimensions UP (W x H x D) | \n41mm x 41mm x 22mm | \n
Вы смотрели
-
-
Популярный
€13.84
-
Популярный
€2.16
-
Популярный
€12.44
-
Популярный
€3801.21