The PBM-07 bistable relay is used to control lighting or any other device by means of unipolar push buttons connected in a parallel way. \n \nThe relay is equipped with two outputs activated by means of impulses given to the (IN) input. \n \nIt allows to control two circuits / branches simultaneously. The control impulse must be the “L” line signal. \n \nThe trigger input structure enables cooperation with backlit push buttons (including LED backlight). \n \nThe total current of backlight for the (IN) input can not exceed 1,5 mA. \n \nThe device is designed to be mounted in distribution boards (TH35 rail). LEDs on the front panel indicate power supply (green LED) and the output status (2 x red LED). \n

FEATURES

\n- Control of lighting and other devices according to a defined sequence \n- System release only from the “L” line \n- Two independent relay outputs – (dry contacts) 2 NO /NC contacts with a maximum load of 16 A \n- Output status indicated by red LEDs (2 x red LED) \n- Possibility of cooperation with unipolar backlit push buttons \n- Mounting in distribution boards (TH35 rail) \n- Power supply indication (1 x green LED) \n- Two-wire control installation \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Mounting method	DIN Rail Mounted
Rated supply voltage	230 V
Power supply terminals	L , N
Number of channels	2
Rated temperature	- 20/45 °C
Rated frequency	50/60 Hz
Parameters of relay contacts	16 A NO/NC 4000 VA AC1
Protection degree	IP20
Protection degree	II
Overvoltage category	II
Dimensions	90 x 17.5 x 66 mm

\n